Hog Panel Fence Plans: 4 ft and 5 ft Wire Panel Fence with a Walk Gate and a Double Drive Gate
Plans for a modern wire panel fence in two heights, 4 ft (hog panel) and 5 ft (cattle panel), each with a 4 ft walk gate or a 12 ft double drive gate. Pressure-treated 4x4 posts on an 8 ft bay, a top and bottom rail framing the panel, a flat cap board over the top and 6x6 gate posts with a braced gate frame. Our own design. Easy to follow and thorough, with dimensioned drawings, cut and shopping lists, a bay calculator and cost workbook with sourced prices, and CAD files.
One-time payment, secure checkout by Stripe. You go straight to your download page after you pay.
Buy now, instant download $9.99Easy to follow, nothing left out
Every cut has a letter (A, B, C), and every step shows which lettered parts and which screws and staples go together, so you build the fence like flat-pack furniture, one step at a time.
You also get dimensioned drawings, a materials and shopping list, a cost spreadsheet and CAD files, so the plans answer the questions that come up while you build.
CAD files included
A SketchUp-ready 3D model (.dae, every board a named part) plus DXF drawings for AutoCAD, LibreCAD or FreeCAD, so you can change a size, add your lot lines or hand the drawings to a drafter.
What you build
Plans for a hog panel or cattle panel fence with a walk gate or a double drive gate, 4 ft and 5 ft.
Pressure-treated 4x4 line posts 48 in down in 12 in concrete holes on an 8 ft bay, 2x4 top rails and 2x10 (4 ft) or 2x6 (5 ft) bottom rails on edge, a 16 ft panel cut into two 92 in pieces and stapled behind the rails, a 2x6 cap laid flat over the posts, 6x6 gate posts, and 2x4 gate frames with a compression brace from the hinge corner to the latch corner. The panels, lumber, concrete and hardware are bought separately; a permit drawing set is not included.
- A 16 ft panel cuts into two 92 in pieces, so there is almost no waste
- The panel is stapled behind the rails and a flat cap covers its top edge
- A walk gate (4 ft) and a double drive gate (12 ft) in each height, with a brace that keeps the latch end from sagging
- Wind, post depth, hinge pull-out and gate brace checks worked out on the sheet against their limits
- A bay calculator that counts bays, posts, panels, boards, concrete and hardware for your fence length, with a price on every line
Check the rules first
Fences over 6 ft often need a permit and many towns limit front-yard fence height. These builds are 4 ft and 5 ft to the top of the cap. Check your town and your HOA, find your property line and call 811 before you dig. The wind and soil assumptions are listed on the first sheet of the plan PDF: clay, silt, soft or wet soil, deeper frost or stronger wind need a design for your area, so check with your local building department.
What you get
- The plan PDF: dimensioned drawings, lettered parts and numbered steps with one drawing each, cut lists and shopping lists for all four builds
- Cut lists and shopping lists with board, panel and hardware counts for every build
- A bay calculator and an editable materials cost spreadsheet (.xlsx) with a real shelf price on every line, working in Excel, Google Sheets and Apple Numbers, with a guide to opening it in Google Sheets
- CAD files: SketchUp-ready 3D models (.dae) and DXF drawings
- The worksheets again as printable web pages (ZIP), so you can reprint single pages any time

Instant download of every file listed above.
Buy now, instant download $9.99