Shed size · 77 sq ft
What fits in a 7x11 shed?
A 7x11 shed has 77 sq ft of floor. Drawn to scale with a clear aisle, it holds 2 bikes, a wheelbarrow, a push mower, a shelving unit but not a shelving unit, and it can take a 42 in lawn tractor if the door is at least 5 ft wide. Kits this size run $1,640 to $1,660 on Amazon.
A 7x11 is the most common first shed size band. At 77 sq ft it takes a full set of garden tools plus bikes, and a lawn tractor only if you give up most of the rest of the floor. Below, two common loads are drawn to scale on a 7x11 floor, so you can see what actually fits once you leave yourself a way in.
What fits in a 7x11 shed, drawn to scale
How many of each item fit in a 7x11?
Each row is that item on its own, packed flat on the floor with a clear aisle kept from the door. Hanging bikes and stacking bins beat these numbers; parking a mower across the aisle does not count.
| Item | Fits |
|---|---|
| Riding mower / lawn tractor (42 in deck) | 1 |
| Zero-turn mower (48 to 54 in deck) | 1 |
| Push mower (handle folded) | 6 |
| Two-stage snow blower | 2 |
| Wheelbarrow | 2 |
| Adult bike (on the floor) | 4 |
| Trash or recycling can (96 gal) | 4 |
| Gas grill (off-season) | 4 |
| Shelving unit (18 x 48 in) | 8 |
| Workbench (2 x 6 ft) | 4 |
| Kayak (floor) | none |
Is a 7x11 shed big enough for a riding mower?
Yes. A 42 in lawn tractor (about 4.5 x 6 ft parked) fits in a 7x11, but it takes the middle of the floor and leaves narrow strips either side. The real test is the door: you need at least 5 ft of clear opening, so check the kit's door spec before the footprint.
Not sure about your own mix of gear? The shed size calculator adds up every item's footprint, multiplies by 1.5 for aisles and reach, and names the smallest standard size that works.
What does a 7x11 shed cost?
We track 2 real 7x11 kits, from $1,640 to $1,660. At the measured median price per square foot for each material, 77 sq ft works out like this:
| Material | Low (10th pct) | Median | High (90th pct) |
|---|---|---|---|
| Resin (HDPE) | $924 | $1,400 | $2,305 |
| Vinyl (PVC) | $1,000 | $1,558 | $2,051 |
| Steel | $237 | $404 | $1,014 |
| Wood | $782 | $1,604 | $2,536 |
Kit prices only. Budget about $160 for a 4 in gravel pad, around 6 anchors, and fit-out on top. The shed cost calculator totals it for your material and foundation.
7x11 shed kits on Amazon
Spread across the price range, cheapest first.
Prices change often; the button shows today's price on Amazon.
Every 7x11 kit we track
| Kit | Footprint | Material | Floor | Price |
|---|---|---|---|---|
| Keter Cortina 11x7 Ft All-Weather Storage Shed with Skylight | 7 x 11 ft | Resin (HDPE) | not stated | $1,640 |
| Keter Signature Collection 11x7 Ft All-Weather Storage Shed | 7 x 11 ft | Resin (HDPE) | not stated | $1,660 |
What foundation does a 7x11 shed need?
Most resin and steel kits want a flat, level, well-drained base a little larger than the shed. For a 7x11, that is a 9 x 13 ft gravel pad: about 2.2 tons of crushed stone at 4 in deep, or 3.3 tons at 6 in. A 4 in concrete slab takes 1.05 cubic yards (48 bags of 80 lb mix), and a paver base takes about 46 pavers at 16 in. Full quantities and costs are on the 7x11 shed foundation page.
Does a 7x11 shed need a permit?
At 77 sq ft a 7x11 is exempt by size under all three common thresholds. Height limits (often 10 to 12 ft at the peak), setbacks of 3 to 5 ft from property lines and HOA covenants apply at any size, and wiring always needs an electrical permit. Run your numbers through the permit size checker, then check your local code.
Sizes next to a 7x11
- 6x12 shed (72 sq ft, one step smaller)
- 8x10 shed (80 sq ft, one step larger)
- 7x7 shed (49 sq ft)
- 7x9 shed (63 sq ft)
- 7x10 shed (70 sq ft)
- 7x12 shed (84 sq ft)
- 7x14 shed (98 sq ft)
Fit out a 7x11
Wall storage is how a small floor holds more than the table above says.
Prices change often; the button shows today's price on Amazon.
Frequently asked questions
How many square feet is a 7x11 shed?
A 7x11 shed is 77 square feet of nominal floor area. Usable floor is a little less, because kit dimensions are usually measured at the roof or outside the walls, and resin and steel walls take up floor on every side. Compare the interior dimensions in the kit's spec sheet before you commit, especially if a mower or workbench needs every inch.
Can a riding mower fit in a 7x11 shed?
Yes. A 42 in lawn tractor (about 4.5 x 6 ft parked) fits in a 7x11, but it takes the middle of the floor and leaves narrow strips either side. The real test is the door: you need at least 5 ft of clear opening, so check the kit's door spec before the footprint.
Do I need a permit for a 7x11 shed?
At 77 sq ft a 7x11 is exempt by size under all three common thresholds. The International Residential Code exempts one-story storage sheds up to 200 sq ft, but many towns lower that to 120 or 100 sq ft, and setbacks, easements, HOA rules and any electrical work apply at every size. Check your local code before you order the kit.
How much gravel do I need for a 7x11 shed?
With a 1 ft border on every side, a 7x11 shed sits on a 9 x 13 ft pad. At 4 in deep that is 1.59 cubic yards, about 2.2 tons of crushed stone including 10 percent for compaction. At 6 in, for soft or wet ground, order 3.3 tons. Lay weed fabric first and frame the pad with treated timber.
How much does a 7x11 shed cost?
The 2 7x11 kits in our catalog run from $1,640 to $1,660. Add about $160 for a gravel pad, $72 or so for anchors, and $150 or more for shelving, a light and a lock. Prices change often, so check the live price before budgeting.
This page is researched guidance, not professional engineering, legal or building-code advice. Sizes, loads and permit rules vary by product and by town: check your local code and the kit manufacturer's instructions before you build.