ShedSizerMeasure twice, buy once

AirWire · 10 x 14 ft · Steel

AirWire 14x10 FT Outdoor Metal Storage Shed with Window: specs and what fits

AirWire 14x10 FT Outdoor Metal Storage Shed with Window is a 10 x 14 ft (140 sq ft) steel shed, listed at $519.99, or $3.71 per sq ft, below the $5.25 median for steel kits we track. It can hold a lawn tractor and needs a 12 x 16 ft gravel pad of about 3.7 tons.

AirWire 14x10 FT Outdoor Metal Storage Shed with Window specifications

BrandAirWire
Nominal footprint10 x 14 ft
Floor area140 sq ft
MaterialSteel
Floornot stated in listing; plan a floor kit or base
Listed price$519.99
Price per sq ft$3.71 (median for steel: $5.25)
Features in listingWindow(s)
Permit status (size only)Depends on your town

Figures come from the manufacturer's Amazon listing. Nominal sizes are usually measured at the roof line or outside the walls, so interior floor is a little smaller. Confirm door opening and interior height on the listing before buying for a mower or tall tools.

What fits in the AirWire 14x10 FT Outdoor Metal Storage Shed with Window?

Lawn tractor Push mower Shelves Shelves door 14 ft 10 ft
Lawn tractor, push mower and shelving. Drawn to scale, one square is 1 ft. The dashed band is the clear aisle from the door.
Item (on its own)How many fit
Lawn tractor1
Push mower10
Adult bike4
Wheelbarrow8
96 gal trash can12+
Shelving unit12+

Counts assume items flat on the floor with a clear aisle from the door. Wall hooks for bikes and tools raise them a lot. Run your own list through the shed size calculator.

What else does it need?

Other 10 x 14 ft kits

Same footprint, different builds and prices.

Prices change often; the button shows today's price on Amazon.

Similar-size kits from other brands

Frequently asked questions

What size foundation does the AirWire 14x10 FT Outdoor Metal Storage Shed with Window need?

A 10 x 14 ft shed sits best on a pad 1 ft larger on every side: 12 x 16 ft. At 4 in of compacted crushed stone that is about 3.7 tons; a 4 in concrete slab under the footprint takes 86 bags of 80 lb mix. Whatever base you choose, it must be flat and level, because resin and steel kits rack out of square on uneven ground and the doors stop closing.

Does the AirWire 14x10 FT Outdoor Metal Storage Shed with Window need a permit?

At 140 sq ft it is exempt only where the 200 sq ft IRC exemption is adopted unamended. The IRC exempts one-story storage sheds up to 200 sq ft, but many towns lower that to 120 or 100 sq ft, and setbacks, HOA rules and electrical work apply regardless. Check your local code before ordering.

Is $519.99 a good price for this shed?

It works out to $3.71 per sq ft. Across the 69 steel kits we track, the middle 80 percent run $3.08 to $13.17 per sq ft with a median of $5.25, so this listing is below the $5.25 median. Amazon prices move often, and the same model in another color can list for a different price, so compare the variants below.

This page is researched guidance, not professional engineering, legal or building-code advice. Sizes, loads and permit rules vary by product and by town: check your local code and the kit manufacturer's instructions before you build.